concrete stone processing
Safe separation of fine quartz dust
The awareness for fine quartz dust has grown considerably in the mineral processing industry in recent years. Stricter standards and limit values are increasing the demands on filtration efficiency and safety. The Herding® Sinter-Plate Filter combines very high separation efficiencies with unparalleled wear resistance.
The Herding® filter technology bases on pure surface filtration. It sustainably protects man and machine from harmful production emissions, reliably separates even the finest dust fractions, and directly increases your productivity. Herding filter elements show extreme durability and, depending on the process, long service life times of more than 15 years. Thereby the filters make a valueable contribution to environmental protection and sustainability.
LONG SERVICE LIFE
CONSTANT OPERATING CONDITIONS
ENERGY EFFICIENCY DUE TO POSSIBLE RECIRCULATING AIR OPERATION
PURE AIR AND CLEAN GAS DUE TO LOWEST CLEAN GAS VALUES
ACTIVE HEALTH PROTECTION BY SAFE SEPARATION
SUSTAINABLE PROVEN TECHNOLOGY
Safe extraction for all areas
It is hard to avoid silica-containing particulate emissions in the various process steps of the stone processing industry. It is recommended to separate processes with high emission levels from other workplaces, but in the concrete stone industry this is rarely possible and often not economically feasible. This makes Individually designed filter systems including efficient dust collection for extraction directly at the source indispensable. With very long guaranteed service lives and absolutely constant operating conditions, even with abrasive dusts, Herding® filter systems with the Sinter-plate Filter elements cover the entire process cycle highly efficiently and reliably.
- Transport via conveyor belts
- Weighing belt / mixer
- Stone moulding machines
- Grinding / calibrating
- Cut-off grinding / sawing
- Ageing / stocking abrasion rumble
- Board suction
- Pneumatic silo filling bunker / chutes
National and international standardization committees have harmonized the limit values for quartz fine dust emissions. The aim is to sustainably minimize potential personal exposure to respirable crystalline silica at the workplace. The fineness of the mineral dusts to be separated in particular, combined with their abrasive properties, sets high standards for filter technology.
Contrary to conventional filter systems based on depth filtration, the patented Herding® Sinter-Plate Filter enables pure surface filtration. This property is achieved by a filter-active coating with a PTFE layer that is homogeneously embedded in the surface of the robust rigid filter body. Abrasive mineral particle emissions as well as quartz dusts are reliably separated without damaging the filter-active layer.
Air recirculation suitability
Measurements by independent institutes have proved clean gas dust concentrations below 0.005 mg/m³ on Herding filter systems for the quartz fine dust fraction (A dust fraction according to DIN EN 481). Thus confirms that these systems allow air recirculation when used for quartz fine dust.
The possibility to recirculate the cleaned air and the possible heat recovery make an important contribution to increase the efficiency and save energy.